SECTLV - Secondary Transmission Level

Identifies the required transmission level when a non-standard interface A common boundary between two systems or pieces of equipment over which there is intersystem communications. is required.

NOTE 1: This field should contain a one character plus or minus (+ or -), a two digit number, a decimal point, and one digit number, a one digit plus or minus, a two digit number, a decimal point, and a one digit number.

NOTE 2: Positions 1-6 are used when an "I" has been entered in position 8 or 11 of the SECNCI field and represents the transmission level to be received at the end user or secondary ACTL Access Customer Terminal Location interface from the provider.

NOTE 3: Positions 7-12 are used when an "I" has been entered in position 9 or 12 of the SECNCI field and represents the transmission level to be transmitted from the secondary ACTL or end user interface to the provider.

NOTE 4: Transmission specifications may be described in provider tariffs and/or in Technical Reference Publications.

USAGE: This field is conditional.

NOTE 1: Positions 1-6 are required when the LEGACT field is "N" or "C" and position 8 or 11 of the SECNCI field is "I".

NOTE 2: Positions 7-12 are required when the LEGACT field is "N" or "C" and position 9 or 12 of the SECNCI field is "I".

NOTE 3: Otherwise prohibited.

DATA CHARACTERISTICS: 12 alpha/numeric characters (including preprinted T, R and 2 decimal points)

EXAMPLES: - 1 5 . 8 T + 0 6 . 3 R