SECNCI - Secondary Network Channel Interface A common boundary between two systems or pieces of equipment over which there is intersystem communications. Code

Identifies the interface characteristics on the circuit at the secondary ACTL Access Customer Terminal Location or end user location.

NOTE 1: The format and structure of this field is defined in the ANSI approved standard, ATIS-0300223, Structure for the Identification of Network Channel (NC) and Network Channel Interface (NCI) Codes for Information Exchange or by COMMON LANGUAGE in BR-795-403-100. A brief summary of the format can be found in ATIS-0404000, Section 2.14.7.

VALID ENTRIES:

NCI Code

NOTE 1: Valid NCI codes are maintained by Telcordia Technologies.

USAGE: This field is conditional.

NOTE 1: Required when the LEGACT field is "N" or "C" and the SECLOC field is not a CLLI code (Common Language Location Identifier) An 11-digit code that an ILEC assigns to acarrier’s location to designate the Central Office or area served by a Central Office.Characters 5 and 6 are the state code, 7 and 8 are the Central Office name, and 9through 11 specify equipment type. CLLI is a trademark of Telcordia., otherwise optional.

DATA CHARACTERISTICS: 5 alpha/numeric characters minimum, 12 alpha/numeric characters maximum

EXAMPLES: 0 4 D A 2 . . A Z

NOTE 1: This example indicates no protocol options with transmission levels specified.

NOTE 2: If the protocol option field is not coded and the TLP is coded, a double delimiter #1 and #2 will be placed after character position five (5).  In this case, delimiter #1 will be in character position six (6), and delimiter #2 will be in character position seven (7).  The TLP will be left justified into character positions eight (8) and nine (9) accordingly.

  0 4 D S 9 . 1 5 K . A Z

NOTE 1: This example indicates protocol options and transmission levels specified.