Identifies the requirement for non-tariff or secondary tariff options and special arrangements (third party billing) in conjunction with the access service.
VALID ENTRIES: |
|||
|
A |
= |
Provide inside wiring plan and bill the end user agent. |
|
B |
= |
Provide site conditioning and bill the customer. |
|
D |
= |
Provide inside wiring, site conditioning and bill the customer. |
|
E |
= |
Provide inside wiring and bill the end user agent. |
|
F |
= |
Provide entrance facility from curb to Minimum Point Of Entry (MPOE) and bill the customer. |
|
G |
= |
Provide site conditioning, entrance facility from curb to Minimum Point Of Entry (MPOE) and bill the customer. |
|
H |
= |
Provide entrance facility from curb to Minimum Point Of Entry (MPOE) and inside wiring and bill the customer |
|
I |
= |
Provide inside wiring, site conditioning, entrance facility from curb to Minimum Point Of Entry (MPOE) and bill the customer. |
|
M |
= |
Control facility required in conjunction with transfer arrangement or similar such configurations in conjunction with a multi-line hunt group. |
|
N |
= |
Terminate in a location other than normal (extend the point of termination using house cable, etc.) at the end user premises. |
|
O |
= |
Other |
|
P |
= |
Wire only with existing access service and bill end user directly. |
|
R |
= |
Referral for inside wiring (provider to negotiate with the end user). |
|
S |
= |
Provide inside wire repair plan and bill the customer. |
|
T |
= |
Provide inside wire repair plan and bill the end user. |
|
U |
= |
Provide inside wiring and repair plan and bill the customer. |
|
V |
= |
Provide inside wiring and repair plan and bill the end user. |
|
W |
= |
Provide inside wiring and bill the customer. |
|
Y |
= |
Provide inside wiring and bill end user directly. |
|
Z |
= |
Provide inside wiring and repair plan and bill the end user agent. |
NOTE 1: Inside wiring may be provided in provider Intrastate tariffs or in an unregulated environment.
NOTE 2: Inside wiring may include cabling, termination panels, media convertors, and labor.
NOTE 3: Site conditioning may include backboard, grounding, and power.
NOTE 4: When the GETO field is “N”, the AAI field on the SALI Form may be used to specify details.
NOTE 5: When the GETO field is “O”, specify requirements in the REMARKS field.
NOTE 6: When the valid entry is other than “B”, “D”, “F”, “G”, “H”, “I”, “N”, “S”, “U” or “W”, the GCON (PRILOC) field must be populated.
NOTE 7: Use of valid entries is based on provider tariffs/practices.
USAGE: This field is optional.
DATA CHARACTERISTICS: 1 alpha character
EXAMPLE: |
R |